胶带机
二手磁带设备
胶带架锻造器设计用于从预刻划的平坦波纹坯料的情况下建立案例，并用带胶带关闭并密封壳体的底部。胶带套装架设可以用垂直朝上的情况或用壳体开口水平地面向外壳的情况来竖立壳体。胶带箱架设设计用于根据安装在磁带盒撞机上的胶带头的类型使用两英寸宽或三英寸宽的胶带。
Related Categories
Tape Equipment In Stock
Wexxar案例竖立磁带WF30
- Manufacturer:Wexxar.
- Model Number:WF30.
- Frain Number:R26720
Wexxar，扩展范围型号WF-30T，自动，内联盒竖立器和底部磁带密封件。评分为每分钟5至30件案例 - 根据材料，应用和机器配置。案例尺寸范围：长度为6“至24”;宽度为5“至17”;高度为5“至16”。配备94英寸的长动力空白盒杂志，别针和圆顶壳体形成板，次要和主要襟翼闭门，壳体推动杆，2“Dekka翻转磁带头和32”长双侧带排放部分。控制面板有A / BPLC带面板视图加上1000个触摸屏控制和e-stop，状态灯条和安全保护。安装在底部框架上，带有水平腿。
OAD: 168" L x 65" W x 99" H
Get a Free Quote Call:630-629-9900.
Wexxar案例竖立胶带ABFT
- Manufacturer:Wexxar.
- Model Number:ABFT
- Frain Number:R26290
Wexxar模型Abft，自动，案例竖立，底锥度。案例尺寸范围：8“至22”的长度;6“到16”的宽度;4“至19”高度。配备48英寸的长动力盒杂志，销钉和圆顶壳体架设系统，带有次要和主要底部净平面近闭合，壳体推动杆，2“宽压敏感底部磁带头，双侧带辅助输送机。控制面板具有A / B控制器，具有运行，慢跑，开/关开关和启动，停止，e-stop，状态灯条和安全保护。安装锁脚轮。速度取决于材料，应用和机器配置。
OAD：156“l x 45”w x 82“h
Get a Free Quote Call:630-629-9900.
Wexxar案例竖立胶带WFT
- Manufacturer:Wexxar.
- Model Number:WFT
- Frain Number:R25749.
Wexxar.Model WFT, automatic, right to left hand, compact case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials and application. Case size range:10" to 22" in Length; 6" to 16" in Width; 9" to 24" in Depth (flaps up). 6" to 24" in Length; 6" to 17" in Width; 3.5" to 16.5" in Depth (flaps down). Equipped with 48" long powered dual screw blank case magazine, pin and dome case erecting system, major and minor flap closers minor and major flap closers, case pusher bar, with 36" long x side roller case assit and 2" bottom tape head. Control panel has A/B controller, pnuematic system, vari-speed controller and start, stop and e-stop push button controls with slid door safety guarding. Mounted on (4) leg base frame with casters.
OAD: 120" L x 48" W x 78" H
Get a Free Quote Call:630-629-9900.
Durable Case Erector Tape TGA1000
- Manufacturer:Durable
- Model Number:TGA1000
- Frain Number:5G4053
TGA1000持久模型,自动的,从右到左se erector, bottom tape sealer rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 7" to 20" in Length; 6" to 16" in Width; 5" to 16" in Depth. Equipped with 48" long blank case magazine, pneumatic tri-grip case erector and squaring arm, bottom flap closer, side flap plows and dual 60" long x 2-1/2" wide side belt case asset conveyors, with 2" bottom tape head. Control panel has A/B controller with auto, off, demand with set up and operator mode control switches, with slide door safety guarding and status light bar. Mounted on heavy duty base frame with casters.
OAD: 120" L x 96" W x 72" H With Magazine
120" L x 56" W x 72" H Without Magazine
Lantech Case Erector Tape C-2000
- Manufacturer:Lantech
- Model Number:C-2000
- Frain Number:R25880.
Lantech, Model C-2000, automatic, inline case erector, bottom taper rated from 5 to 15 cases per minute – depending on materials and application. Case size range: 7-7/8" to 25 5/8" in Length; 5-7/8" to 17-3/4" in Width; 5-7/8" to 23 7/8" in Height. Equipped with 60" long powered dual belt blank case magazine, (4) suction cup pic n place and (4) suction cup case erector combo, 60" long top and bottom lugged case transport conveyors with 40" discharge height, minor and major flap closers, and 2" wide tape head. Control panel has A/B PLC, and swing arm controller with auto, manual, off vacuum controls, start and e-stop buttons, safety guarding, and quick change over capable. Mounted on base frame.
OAD: 100" L x 105" W x 70" H (with magazine)
100" L x 45" W x 70" H (without magazine)
Wexxar案例竖立胶带ABFT
- Manufacturer:Wexxar.
- Model Number:ABFT
- Frain Number:5G3760
Wexxar模型ABFT，自动，左右，案例架构，底锥度从5到25件每分钟均 - 取决于材料和应用。案例尺寸范围：8“至22”的长度;6“到16”的宽度;4“至19”高度。配备48英寸的长动力双螺钉空白盒杂志，钉子和圆顶壳体架设系统，带有次要和主要底部平底柜，外壳推动杆，2“宽压敏感底部磁带头和双34”长34“长x 3”宽手动曲柄可调，侧带assit case输送机。控制面板具有运行，慢跑，开/关开关的A / B控制器，停止，停止，E-STOP按钮控制与Statis Light Bar，Saftey守护和安装在（4）腿基框架上，带锁定脚轮。
OAD：156“l x 45”w x 82“h
Get a Free Quote Call:630-629-9900.
Wexxar案例竖立胶带WFT
- Manufacturer:Wexxar.
- Model Number:WFT
- Frain Number:5G3320
Wexxar型号WFT，自动，右手，销钉和圆顶壳体射击器，底锥度从5到15例每分钟 - 取决于材料，应用和机器配置。案例尺寸范围：长度为6“至24”;宽度为5“至17”;3-1 / 2“至16-1 / 2”深度。配备72英寸的长动力双螺纹空白盒式杂志，销钉和圆顶壳体架设系统，小凸台闭门，壳体推动杆，2“底部磁带头34”长x 3“宽侧双案辅助带式输送机和互锁安全守卫。控制面板具有A / B控制器，启动，停止和e-stop。
OAD: 168" L x 48" W x 74" H
Get a Free Quote Call:630-629-9900.
ABC.Case Erector Tape 340T
- Manufacturer:ABC.
- Model Number:340t.
- Frain Number:5F8880.
ABC型号340T，案例竖立器，底部带封口机。案例尺寸范围：8“至26-3 / 4”的长度;6“到22”的宽度;4“到24”高度。KD尺寸：长度为14“至45”;12“到42”的宽度。配备空白盒式杂志，案例挑选，放置，案例竖立器，专业和小襟翼更近，行走梁壳体传输和2“磁带头，带顶部和底部皮带驱动盒运输。A / B PLC和状态灯条。互锁翻转安全保护。速度依赖于材料，应用和机器配置。
OAD: 168" L x 69" W x 81" H
Get a Free Quote Call:630-629-9900.
ABC.Case Erector Tape 340T
- Manufacturer:ABC.
- Model Number:340t.
- Frain Number:5F8710
ABC型号340T，案例竖立器，底部带封口机。案例尺寸范围：8“至26-3 / 4”的长度;6“到22”的宽度;4“到24”高度。KD尺寸：长度为14“至45”;12“到42”的宽度。配备空白盒式杂志，案例挑选，放置，案例竖立器，专业和小襟翼更近，行走梁壳体传输和2“磁带头，带顶部和底部皮带驱动盒运输。A / B PLC和状态灯条。互锁翻转安全保护。速度依赖于材料，应用和机器配置。
OAD: 168" L x 69" W x 81" H
Get a Free Quote Call:630-629-9900.
Lantech Case Erector Tape CE1000ADJ
- Manufacturer:Lantech
- Model Number:CE1000ADJ
- Frain Number:5E5980
Lantech Model CE1000ADJ，自动，内联不锈钢盒射灯，底锥度从5到18个容器每分钟 - 速度取决于材料和应用。案例尺寸范围：12“ - 19”长度x 6“ - 12”宽度x 6“ - 12”高度。配备有动力的空白盒杂志，带有40“长x 18”宽带式输送机，（4）吸盘式PIC n Place和（2）吸盘式壳体竖琴，60英寸长顶和底部拖曳壳体运输输送机，具有40“排放高度，次要和主要的襟翼近距离，2英寸宽带头部，是手曲柄调整。特点：A / B PLC与ON，OFF，手动，汽车和真空控制，e-stop，Saftey GUARDING可以快速更换，并安装不锈钢基架。
OAD: 193” L x 56” W x 83” H
Get a Free Quote Call:630-629-9900.
SERPA包装盒竖立胶带250CE
- Manufacturer:Serpa包装
- Model Number:2500CE
- Frain Number:5E5770
SERPA型250CE，自动壳体射击器，底锥形。案例尺寸范围：10“至18”的长度;宽度为5“至14”;5“到24”高度。配备空白纸箱杂志，真空电皮PIC，销钉案例运输输送机，顶壳方格装置，2“底部磁带头，A / B PLC，A / B VFD，伺服驱动器，SEIKO仪表，E-STOP和安全保护。安装在高度可调腿上。
OAD：150“L X 84”W X 80“H
Get a Free Quote Call:630-629-9900.