填充物 - 杯灌装机
Used Fillers - Cup Filling Equipment
Frain Industries是提供二手杯灌装设备解决方案的行业权威。Frain携带多种类型的杯填料，覆盖各种产品，包括液体，凝胶，糊剂和粉末。此外，根据产品类型，还有许多类型的填充头。容积杯，螺旋钻，净重，容量活塞灌装机，泵和蠕动只是一些可用的配置。
Frain Industries提供半自动和自动配置的杯灌装机以及内联和旋转。Frain Engineering Team可以根据您的产品，应用，线路速度和线路集成要求设计杯填充解决方案。
- 内联杯灌装机
- 旋转杯灌装机
Frain Industries拥有来自许多OEM的杯灌装机，包括Autoprod，Oystar，Holmatic，Modern，Osgood，Akra Pak，所有填充，Spee Dee，Nova，Trepko，世界杯，金杯等许多其他人。
相关关键词
填充物- Cup Filling Equipment In Stock
Hinds Bock填充杯内联SC-1330
- 制造商：后卫博克斯
- Model Number:SC-1330.
- Frain Number:5H6810
Hinds Bock Model SC-1330，自动，内联不锈钢，空杯尼斯特，填充剂和普雷德。评分为5至60杯/分钟 - 取决于材料，应用和尺寸填充。配备64“长X 6”宽塑料Delrin输送机通过填充部分和72“长X 6”宽柔性纤维链接输送机通过盖板部分，带有32个“进样/放电高度”。带旋转杆杯尼斯特和低堆叠的长空杯杂志。报警，将传送带上的杯子放置在Bimba杯索引中填充（每种应用选择的选择）然后用48“长自动滚筒盒盒和压缩部分的盖涂器，没有容器，无填充，没有盖子系统。控制面板有PLC控制器和A / B面板视图触摸板控制，带循环开始，停止，重置和电子停止按钮。安装在（6）腿部框架上，带锁定脚轮。
OAD：176“L X 32”W X 73“H
免费报价 称呼：630-629-9900.
OSGood填充杯旋转RF-S-100
- 制造商：Osgood
- Model Number:RF-S-100
- Frain Number:5H3620
OSGood型号RF-S-100，12个口袋，伺服驱动，不锈钢，卫生，旋转杯填充物和过度升降机，每分钟杯数 - 取决于材料，应用和机器配置。填充范围：30毫升至40升。容器尺寸范围：直径70mm至170毫米，能够处理PP，PE，圆形，圆形，椭圆形，矩形和方形容器（具有适当的变化部件）。配备32“OD旋转转动台，具有（12）4-3 / 4”OD杯口袋，手或输送机载荷和卸载段，填充4“OD产品填充管和5英寸宽的过盖杂志。控制面板具有控制器和（2）摆臂触摸板控制，带有面板视图和主开/关开关，带有启动，停止和电子停止按钮。安装在（4）腿不锈钢基地，带笼式风格安全门。
改变适应尺寸范围所需的部件。
OAD：66“L X 55”W X 82“H.
免费报价 称呼：630-629-9900.
OSGood填充杯旋转RF-S-100
- 制造商：Osgood
- Model Number:RF-S-100
- Frain Number:5H3621
OSGood型号RF-S-100，12个口袋，伺服驱动，不锈钢，卫生，旋转杯填充物，过潮流，每分钟杯数 - 取决于材料，应用和机器配置。填充范围：30毫升至40升。容器尺寸范围：直径70mm至170毫米，能够处理PP，PE，圆形，圆形，椭圆形，矩形和方形容器（具有适当的变化部件）。配备32“OD旋转转动台，具有（12）4-3 / 4”OD杯口袋，手或输送机载荷和卸载段，填充4“OD产品填充管和5英寸宽的过盖杂志。控制面板具有控制器和（2）摆臂触摸板控制，带有面板视图和主开/关开关，带有启动，停止和电子停止按钮。安装在（4）腿不锈钢基地，带笼式风格安全门。
改变适应尺寸范围所需的部件。
OAD：66“L X 55”W X 82“H.
免费报价 称呼：630-629-9900.
Orics Ind Filler Cup内联2道
- 制造商：Orics Ind
- Model Number:2车道
- Frain Number:R32648.
Orics Ind Model 2车道，内联，不锈钢，杯/托盘士气，填充剂，卷筒卷材，热封剂和潮流器，每分钟托盘/杯子数量 - 取决于材料，应用和机器配置。每个应用程序的容器尺寸和填充卷（具有适当的变化部件）。配备150“长杯/托盘输送机具有17”长x 7-1 / 2“宽载体板，带双4”长x 3-1 / 2“宽矩形托盘袋，（2）36”长托盘脱巢杂志，填充部分（类型填充物为每个应用程序）。自动薄膜卷载体和再次用双模切割热封站和带涂抹器的双盖杂志。控制面板具有带A / B面板的A / B控制器，带有A / B面板摇动臂控制器和PanelView具有（2）加热器温度控制器，机器开/关和e-stop按钮。安装在带水平腿的不锈钢框架上。
OAD: 156" L x 48" W x 72" H
免费报价 称呼：630-629-9900.
现代填充杯内联SL1X4
- 制造商：Modern
- Model Number:SL1X4
- Frain Number:R31770
现代包装、SL1X4模型、自动、内联stainless steel, 4 lane, cup filler and die cut heat sealer. Rated from 40 to 120 containers per minute – depending on materials, application and machine configuration. Equipped 1×4 plates set on 4½" centers, cup / tray de-nest station, (2) filling stations, no container / no fill, die cut film seal. Control panel has an AB controller with touch screen HMI, digital temperature controllers and on/off switches for each station. Mounted on stainless steel base frame with safety guarding.
OAD：145“l x 60”w x 88“h
免费报价 称呼：630-629-9900.
现代填充杯内联SL1X4
- 制造商：Modern
- Model Number:SL1X4
- Frain Number:R31773.
现代包装，型号SL 1x4，自动，内联，不锈钢，4道，杯填充物，卷载热封和过光。每分钟40到120个容器 - 取决于材料，应用和机器配置。装备1×4个板上套装6“中心，杯/托盘脱巢站，活塞灌装站，卷筒卷材封印和过潮。控制面板具有带触摸屏HMI，数字温度控制器和开/关开关的AB控制器对于每个站。安装在不锈钢基架上，安全防护。
OAD：135“l x 60”w x 96“h
免费报价 称呼：630-629-9900.
现代填充杯内联SL1X4
- 制造商：Modern
- Model Number:SL1X4
- Frain Number:5H6551
现代包装，型号SL1X4，自动，紧凑，内联，不锈钢，4车道，活塞杯填充物，带热封器和盖涂器的卷筒卷材。每分钟60到160个容器 - 取决于材料，应用和机器配置。配备（4）站滚轮样式空杯De-nester，156英寸长杯输送机，5英寸长的x 23“宽载体板，并在3-1 / 2”OD杯口袋上有（4）套在6英寸中心（4）2-3 / 4“OD X 12”长活塞和1-3 / 4“无滴灌的喷嘴，设置在6”中心，没有容器/无填充，卷筒卷材和热封站，自动薄膜倒带，45“长盖盒和涂抹器，具有（3）滚筒盖压缩部分。控制面板具有A / B控制和A / B PanelView控制器，启动，启动，停止和电子停止控制。安装在（6）腿不锈钢框架上，具有互锁安全保护。
OAD：156“l x 57”w x 104“h
免费报价 称呼：630-629-9900.
世界杯填充杯旋转12-32
- 制造商：世界杯
- Model Number:12-32
- Frain Number:5H6460.
世界杯型号12-32，自动，不锈钢，12个口袋旋转杯填料，芯片涂布器，热封器和潮流，每分钟杯子数 - 取决于OM材料和应用。填充范围：1盎司至32oz。集装箱大小最多可达：4-3 / 4“OD，大多数形状（两者都有适当的变化部件）。配备33”长空杯子杂志，拉下杯尼斯特，22“OD X 25”深不锈钢产品料斗，带盖子，30“旋转杯旋转桌和（12）3-1 / 2”ID杯口袋套装在6“中心，活塞填料，带1”OD正切割喷嘴，没有容器/无填充，底部填充，8“长卷式薄膜滚筒，带气动热封头，38”长自动滚筒盒盒和涂抹器，带气动单臂杯拒绝。控制面板具有A / B CPU控制器，带杯滴管，填充器，加热器，铝箔开关，料斗打开/关闭，桌子慢跑，停止，运行开关，带有胶片前进和e-stop按钮的热控制器。安装在不锈钢框架上。
OAD: 84" L x 60" W x 76" H
免费报价 称呼：630-629-9900.
Holmatic / Oystar填充杯内联PR-3S
- 制造商：Holmatic /Oystar
- Model Number:PR-3S.
- Frain Number:R31755.
Holmatic Model PR-3S, 3 lane, inline, stainless steel, cup filler, roll stock film sealer rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: 5" to 7" in Diameter; up to 7.3" in Height. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor has 8-3/4" long x 24" wide carrier plates with (3) 4-1/4" OD cup pockets set on 9" centers, cup de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Mounted on stainless steel frame with cage style safety guarding.
推荐用于Wipedown环境，应用范围从硬糖到干汤和零食食品到宠物零食。
OAD：193“l x 92”w x 91“h
免费报价 称呼：630-629-9900.
Holmatic / Oystar填充杯内联PR-3S
- 制造商：Holmatic /Oystar
- Model Number:PR-3S.
- Frain Number:R31757.
Holmatic Model PR-3S, 3 lane, inline, stainless steel, cup filler, roll stock film sealer rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: 5" to 7" in Diameter; up to 7.3" in Height. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor and has 8-3/4" long x 24" wide carrier plates with (3) 4-1/4" OD cup pockets set on 9" centers, cup de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Mounted on stainless steel frame with cage style safety guarding.
推荐用于擦拭环境，应用范围从硬糖到干汤和小吃食品到宠物款待。
OAD: 180" L x 80" W x 84" H
免费报价 称呼：630-629-9900.
Holmatic / Oystar填充杯内联PR-3S
- 制造商：Holmatic /Oystar
- Model Number:PR-3S.
- Frain Number:R31758
Holmatic Model PR-3S, 3 lane, inline, stainless steel, tray filler, roll stock film sealer rated from 30 to 120 trays per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: per application. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor has 8-3/4" long x 24" wide carrier plates with (3) 7-3/4" long x 5-1/2" wide rectangle tray pockets set on 9" centers, tray de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding.
推荐用于Wipedown环境，应用范围从硬糖到干汤和零食食品到宠物零食。
OAD：190“L X 72”W x 84“h
免费报价 称呼：630-629-9900.
Holmatic / Oystar填充杯内联PR-3S
- 制造商：Holmatic /Oystar
- Model Number:PR-3S.
- Frain Number:R31756.
Holmatic Model PR-3S, 3 lane, inline, stainless steel, cup filler, roll stock film sealer rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Sanitary stainless steel and hard anodized aluminum construction. Container size range: 5" to 7" in Diameter; up to 7.3" in Height. Fill volume up to 90oz each head. Change parts required to accommodate different sizes. Equipped with 180" long cup conveyor has 8-3/4" long x 24" wide carrier plates with (3) 4-1/4" OD cup pockets set on 9" centers, cup de-nest station, 30" long x 17" wide x 24" deep, stainless steel, jacketed, agitated product hopper, (3) head piston filler, with (3) 15" long x 2-1/4" ID pistons, and 2-1/4" OD nozzles (change part per application) no container / no fill, automatic film roll stock feeder and rewinder with die cut heat sealing stations. Control panel has A/B PLC controller with A/B onboard panelview and operator read out (3) heat seal, start, stop, e-stop controls. Mounted on stainless steel frame with cage style safety guarding. Mounted on stainless steel frame with cage style safety guarding.
推荐用于Wipedown环境，应用范围从硬糖到干汤和零食食品到宠物零食。
OAD: 180" L x 80" W x 90" H
免费报价 称呼：630-629-9900.