Mixers - Paste Mixing Machines

霍巴特搅拌机糊蛋糕v1401

• Manufacturer:Hobart
• Model Number:V1401
• 数字：R21231

霍巴特140夸脱双行星面团搅拌机配备了不锈钢接触零件。碗容量为140夸脱。功能包括打浆杆和刮擦搅拌器，4速可调速度和计时器控制以及液压碗升降机。最后一次在食品行动中运行。

OAD: 30" W x 44"L x 72"H

康奈尔Mixer Paste Horizontal D8 Cornell Horizontal Versator

• Manufacturer:康奈尔
• Model Number:D8
• 数字：R20671

康奈尔Model D-8 variable speed "Versator" with vacuum pump, rated to 2 gpm, depending on product and viscosity. Unit has a 8" diameter disc, a 1/2" product inlet, 1/2" product discharge, a 1/2" top vacuum port, with gauge and a 1/2" bottom drain. Product flows through a film-forming ring out and over the surface of the rotating disc at which time the dispersion/deaeration action occurs. Disc rotation rated from 2000 – 6000 rpm. Commonly used for despersion, and deaeration for food, cosmetic, pharmaceutical and chemical applications. Includes 316 S/S contact parts, quick release glass cover and AB starter boxes. Mounted on a painted steel base. Kinney 3/4 hp vacuum pump. Last running in a pharmaceutical operation.
OAD:47"L x 37"W x 68" H

奥克斯混合器粘贴水平4 mb3a

• Manufacturer:奥克斯
• Model Number:4MB3A
• 数字：R20542

Oakers Model 4MB3A, lab model, continuous mixer, aerator rated from 150 lbs to 500 lbs per hour – depending on materials and application. Equipped with mixing head of two stators and a rotor, and is assembled with the stators surrounding the rotor. The rows of blades on the rotor are located between those on the stators, with no contact between moving and stationary elements. The mixing takes place between the teeth of the rotor and each of the two stators. Ingredients enter the head through the center of the rear stator, flow in a swirling path between the blades of the rotor and rear stator to the outer circumference of the stator cavity, then between the teeth of the front stator and rotor and out the center of the front stator. Product is discharged under pressure, it may be piped directly to the point of use thus eliminating any manual handling of the finished material. Air or other gas may be incorporated in the mixture and evenly distributed throughout the whole mass. The stator members are jacketed through which coolants may be circulated, thereby removing heat energy added as a result of the mixing action.
OAD: 3’L x 3’W x 5’H

Ross Mixer Paste Vertical LDM

• Manufacturer:Ross
• Model Number:LDM
• 数字：R18191

罗斯模型LDM1 1夸脱双行星搅拌机,304 S/S, jacketed bowl. Mixing head has (1) 1/2"dia threaded port and (2) 2-5/8"dia tri-clover fitted inlet/outlet/site glass ports.

OAD：22“ L X 20” W X 25” h。

Baker Perkins / B P Process Eq Mixer Paste Double Arm DOUBLE ARM

• Manufacturer:Baker Perkins / B P Process Eq
• Model Number:DOUBLE ARM
• 数字：5G2392

Baker Perkins double arm, carbon steel, jacketed bowl, overlapping sigma blade lab style mixer. Mixing chamber dimensions: 7" long x 5" wide x 7" deep. Equipped with 9 1/2" x 9" bolt down cover, jacket rated 125 psi @ 450°F, 2 hp main and manual tilt handle. Push button start/stop controls. Mounted on mild steel base.

OAD: 49" L x 24" W x 48" H

Baker Perkins / B P Process Eq Mixer Paste Double Arm DOUBLE ARM

• Manufacturer:Baker Perkins / B P Process Eq
• Model Number:DOUBLE ARM
• 数字：5G2391

Baker Perkins double arm, carbon steel, jacketed bowl, overlapping sigma blade lab style mixer. Mixing chamber dimensions: 7" long x 5" wide x 7" deep. Equipped with 9 1/2" x 9" bolt down cover, jacket rated 125 psi @ 450°F, 2 hp main and manual tilt handle. Push button start/stop controls. Mounted on mild steel base.

OAD: 44" L x 23" W x 53" H

康奈尔搅拌机糊水平D8 Cornell D8 Versator

• Manufacturer:康奈尔
• Model Number:D8
• 数字：R10251

Versator Consists Of A Pressure Chamber W/Disc In The Form Of An Open Bowl That Revolves At Speeds Of 2,000 To 6,000 Rpm. Rated At 2 U.S. Gpm, Depending On Viscosity, Adhesion Factor And Desired Objectives Process Flows Through A Springloaded, Film-Forming Ring, Centrifugal Force Results In Dispersing And Homogenizing And Deaerating Action. May Run Hot Water To Chewing Gum. Suitable For Vacuum Application Only

冠军Mixer Paste Single Arm 15CUFT

• Manufacturer:冠军
• Model Number:15CUFT
• 数字：5G3703

冠军单臂, 304 stainless steel, sigma style mixer with working capacity of 15ft³. Chamber dimensions: 32" in Length; 30" in Width; 30" in Depth, 600 lb. Equipped with sigma mix arm, hinged cover with (2) 32" long by 5" wide openings, bottom half low pressure jacket, dual end drive motor to chain and sprocket drive, hand crank tilt discharge, E-stops, safety interlocks for tilt discharge. Mounted on heavy duty frame. Used for gentle, thorough mixing of heavy breads, cookie dough and specialty products.

OAD: 67"L x 54"W x 63"H

康奈尔Mixer Paste Horizontal D8

• Manufacturer:康奈尔
• Model Number:D8
• 数字：5G3540

康奈尔Model D-8 variable speed "Versator" rated 0 to 2 gallons per minute with Disc rotation rated from 2000 to 6000 rpm – depending materials and application. Equipped with 6" diameter disc and has 1/2" product in/outlet and 1/2" top vacuum port, and 1/2" bottom drain. Product flows through a film-forming ring out and over the surface of the rotating disc at which time the dispersion / desecration action occurs. Commonly used for dispersion, and deaeration for food, cosmetic, pharmaceutical and chemical applications. Includes 316 stainless steel contact parts, quick release acrylic cover. Mounted on push cart with casters.

OAD: 35"L x 45"W x 30"H

贝克·珀金斯（Baker Perkins） / b p工艺eq搅拌机粘贴双臂150加仑

• Manufacturer:Baker Perkins / B P Process Eq
• Model Number:150 GALLON
• 数字：5G0500

Baker Perkins Model 150 gallon, jacketed, double arm, sigma blade style bowl mixer with pounds of product per hour – depending on materials and application. All stainless steel contact parts. Chamber dimensions: 37" long x 44" wide x 41" deep. Equipped with flip-up clamp down cover with (2) top flanged and (1) site ports and 36" long stainless steel double sigma blades. Full jacket has (2) 5" OD flanged side ports one each side with (4) 1/2" bolt holes on 2-1/2" centers with 2" OD threaded steam ports. 16" OD center bottom discharge with 48" floor clearence. Mounted on heavy duty (10) leg bolt down base frame.

OAD: 120" Lx 72" W x 108" H

Baker Perkins / B P Process Eq Mixer Paste Double Arm

• Manufacturer:Baker Perkins / B P Process Eq
• Model Number:
• 数字：5G0040

贝克·珀金斯（Baker Perkins）3/4加仑，双臂，碳钢，外套，重叠的Sigma Blade Lab Style搅拌机。混合室尺寸：7英寸长x 5英寸宽x 7“深。。

OAD: 48" L x 28" W x 72" H

奥克斯Mixer Paste Horizontal 10

• Manufacturer:奥克斯
• Model Number:10
• 数字：5E9070

高剪切，连续，转子，定子，搅拌机的额定值为每小时2000磅 - 具体取决于材料和应用。配备12英寸OD / 10英寸ID ID混合头，带2英寸OD螺纹中心产品端口，是一个径向流盘，具有高剪切动作，由前 /后定子和带有卫生密封驱动轴的转子组成，额定为600 rpm，有一个底座安装的Waukesha泵，带有1-1 / 2“ OD卫生泵入口 /插座，转子和泵的启动 /停止按钮，带有E-Stop。

Optional: Oakes 4MB3A Lab/ R&D mill available for short term testing before running your large batch on mill listed above. Item R202542.

OAD: 60" L x 30" W x 63" H