Ribbon S. S. Machines

Mueller Mixer Powder Ribbon S. S. 50FT³

• Manufacturer:Mueller
• Model Number:50FT³
• Frain Number:R31775

Mueller, 50 ft³, double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 58" in Length; 41" in Width; 45" in Depth. Equipped with dual flip up cover and lift out safety grate, 3" OD mixing shaft with 1½" wide x (5/8)" thick (outer) and 2½" wide x (3/8)" thick (inner) stainless steel ribbons and (2) CIP spray balls. 4¾"OD / 3¾" ID Tri-Clamp discharge with 27" ground clearence. Mounted on (4) leg frame.

OAD: 96"L x 55"W x 80"H

Ross Mixer Powder Ribbon S. S. 42A36

• Manufacturer:Ross
• Model Number:42A36
• Frain Number:5H5476

Ross, 36 ft³ workable, variable speed double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 78" in Length; 30" in Width; 32" in Depth. Equipped with flip up cover, 24" long x 20" wide x 16" deep hopper with bottom (4) paddle sifter powered by a ½ hp drive, 3" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 1½" wide x (1/8)" thick (inner) stainless steel ribbons powered by 10 Hp motor drive. 4" OD center bottom manual slide discharge with 35" ground clearance.

OAD: 120"L x 38"W x 98"H

J H Day Mixer Powder Ribbon S. S. 25 FT³

• Manufacturer:J H Day
• Model Number:25 FT³
• Frain Number:5H5185

J H Day, 25 ft³, double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts and Inner mixing chamber dimensions of: 67" in Length; 26" in Width; 28" in Depth. Equipped with flip up cover and flip up safety grate, 3" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 1½" wide x (1/8)" thick (inner) stainless steel ribbons. 3½" OD center bottom discharge with manual slide gate and 36" ground clearence. Mounted on (4) leg frame.

OAD: 100"L x 36"W x 84"H

罗斯混合粉带RB1CUFT

• Manufacturer:Ross
• Model Number:RB1CUFT
• Frain Number:R30051

Ross, 1 ft³, double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 19½" in Length; 12" in Width; 14" in Depth. Equipped with flip up cover and lift out grate with safety switch, 1¼" OD shaft, with 1" wide (outer) and 1" wide (inner) x ¼ " thick stainless steel ribbons. 3" OD center bottom discharge has hand operated butterly valve with 33" floor clearence, vari speed ¾ hp motor with forward/off/reverse control switch and mounted on mild steel (4) leg base frame with casters.

OAD: 45" L x 26" W x 53" H

Mixer Powder Ribbon S. S. 70 FT³

• Model Number:70 FT³
• Frain Number:5H4466

75 ft³ (70 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 96" in Length; 38" in Width; 40" in Depth. Equipped with dual flip up covers, 12" OD charge port, 4½" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons. 9" OD center bottom discharge has manual slide valve with 43" floor clearence and 20 Hp motor drive. Mounted on (4) leg base frame.

OAD: 155" L x 46" W x 95" H

J H Day Mixer Powder Ribbon S. S. 5 CU FT

• Manufacturer:J H Day
• Model Number:5 CU FT
• Frain Number:R21766

5 Cuft, 304 S/S, fully jacketed, single shaft double ribbon blender (37 gallon working capacity) and a 6 cubic foot (45 gallon) overall capacity. Has side liquid injection w/ 5 ports. Chamber measures 38"(W) x 17"(L) x 18"D). Jacket working pressure 80 psi @ 324 Deg. F. Shell working pressure is Atmosphere @ 324 Deg. F. Jacket has (2) 1" side inlet/outlet ports, (2) 1" bottom inlet/outlet ports, and (2) 3/16" side pressure relief ports. Equipped with dual hinged dust tight lid with a 7/8" center vent, sanitary stuffing box, continuous ribbon agitator with the inner spokes measuring 3/16”(thick) x 1 ”(high), outer spoke 3/8” (thick) x 1"(high), 3" dust tight slide gate center bottom discharge at 35” from the ground. Allen Bradley start/stop controls and safety switches. Mounted on casters. National Board # 1677
(OAD: 65"(L) x 24"(W) x 52"(H).

Scott Mixer Powder Ribbon S. S. GHPM6010

• Manufacturer:Scott
• Model Number:GHPM6010
• Frain Number:5H3921

Scott, 10 ft³ (8 ft³ workable), 304 S/S double ribbon/paddle mixer. Inner mixing chamber dimensions: 36" in Length; 22" in Width; 24" in Depth. Equipped with 3" diameter shaft with 7" x 3½" stainless steel paddles powered by 5 Hp drive, 4" diameter center bottom discharge with manual slide gate valve. Pounds of product per hour dependant on marterials and application. Mounted on four leg frame.

OAD: 43" L x 31" W x 80" H

Babcock Gardner Mixer Powder Ribbon S. S. L SERIES 400L

• Manufacturer:Babcock Gardner
• Model Number:L SERIES 400L
• Frain Number:5F4270

17 cu ft, 304 Stainless steel, L Series, ribbon mixer. Chamber dimmensions: 85" in Length x 22" in Width x 28" in Depth with flip top cover, 3" OD center shaft with 1-1/4" wide x 1/4" thick single ribbons on 1-1/4" 1" OD spokes, 6" OD end bottom discharge with manual open discharge valve with 11" floor clearence.

OAD: 130" L x 32" W x 48" H

American Process Systems Mixer Powder Ribbon S. S. 20 FT³

• Manufacturer:American Process Systems
• Model Number:20 FT³
• Frain Number:5H4963

American Process, 20 ft³, 316 stainless steel ribbon mixer with pounds of product per hour – depending on materials and application. Toatal capacity: 20 ft³ Working capacity: 17 ft³. Single trough dimensions: 60" in Length; 24" in Width; 28" in Depth. Equipped with lift up safety grate, 1" wide x ¼" thick (outer) / 2" wide x (1/8)" thick (inner) stainless steel ribbons and single end pneumatic gate discharges with 61" ground clearance.Powered by a 7½ hp drive.

OAD: 90"L x 34"W x 90"H

Aaron Equipment Mixer Powder Ribbon S. S. 25 FT³

• Manufacturer:Aaron
• Model Number:25 FT³
• Frain Number:5H4465

Aaron, 25 ft³ (23 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 66" in Length; 26" in Width; 30" in Depth. Equipped 4" OD mixing shaft with ¾" wide x ¼" thick (outer) and 2" wide x ¼ thick (inner) stainless steel ribbons. 6" OD center bottom discharge with manual slide valve and 45" floor clearence. Mounted on (6) leg base frame.

外形尺寸:143" L x 32" W x 88" H

Mepaco Mixer Powder Ribbon S. S. 170

• Manufacturer:Mepaco
• Model Number:170
• Frain Number:R30125

Mepaco, Model 170, 304 stainless steel dual trough jacketed ribbon blender Rated from 0 to150 pounds of product per batch – depending on materials application and machine configuration. Capacity: 2½ ft³ total (2 ft³ working). Dual trough dimensions: 25" in Length; 22" in Width; 15" in Depth. Equipped with lift up top coverand lift up grate, dual pneumatic gate discharges with 30" ground clearance. Powered by (2) 1 Hp motor drives with mechanical variable speed. Control panel has start / jog / stop and switches for mix / unload / reverse and open / close for both discharge doors. Mounted on heavy duty base frame with casters.

Top Ports:
(1) 1" NPT
(1) ¼" NPT

Jacket Ports:
(4) 1" NPT

MAWP: 100 psi @ 338°F
MDMT: -20°F @ 115 psi
Nat’l Brd: 10711

OAD: 46"L x 40"W x 51"H

Toronto Mixer Powder Ribbon S. S. CDR24

• Manufacturer:Toronto
• Model Number:CDR24
• Frain Number:5G5502

Toronto Coppersmithing, Model CDR 24, 37 ft³ (27 ft³ workable), single ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 60" in Length; 30" in Width; 39" in Depth. Equipped with flip up cover, 2½" diameter motor shaft, 3½" diameter mixing shaft with 2" wide x ½" thick stainless steel ribbons. 6" diameter center bottom discharge has ____ valve with 48" floor clearence and 30 Hp motor. Mounted on mild steel (4) leg base frame.

OAD: 105" L x 33" W x 93" H