Arpac Machines

Arpac Case Packer Tray Form/Pack TS2212/45TW28

• 制造商：Arpac
• Model Number:TS2212/45TW28
• Frain Number:5H5201

ARPAC型号TS2212 / TS60 / 45TW-28，齐全，自动，持续运动，伺服驱动，托盘成型，包装，封装，从5至45托盘每分钟额定单位，每盘数量 - 取决于材料和应用。纸盘尺寸为每个申请。系统由ARPAC型号2212托盘前，包装机和热熔胶密封件，具有120“长×18”宽产品，进给输送机，（4）车道分隔器到（4）48“长x 2-1 / 2”宽产品分组输送机侧安装68“宽X 32”高空白托盘盒，具有（2）吸盘式PIC N可放置到托盘成型，包装和密封部分，具有（4）106“长×1/2”宽透明压缩/放电传送带部分坐落于12英寸的中心与Nordson Hot Melt胶合装置，带有主要/小襟翼闭合器。ARPAC型号TS60 Double Upstacker 60“进料输送机的长滚子，21英寸宽x 1-1 / 4”OD滚筒在1-1 / 2上设置“有1/8”差距的中心。整理系统具有70“长滚子部分，具有22英寸宽x 1-3 / 4”OD滚筒，设置在2-1 / 2“中心，具有1/2”空白，54“长x 16”宽upstack部分
72“LONG X 17-1 / 4”宽帆布传输输送机以ARPAC型号45TW-28收缩捆绑和隧道（1）36“x 19”宽和（1）36“宽x 72”长套装送刀，顶部和底部薄膜卷最大薄膜卷宽度为27“和14”od具有29英寸宽的密封钳x 13“高的总清除，到单区域收缩隧道，具有36”宽x 19-1 / 2“高总孔径x 72“长收缩室，带29”宽x 108“长产品输送机通过倒数隧道与顶部放电冷却风扇。控制面板具有带触摸板控制的A / B控制器。并读出。全部安装在重型基础框架上有安全保护和Statis灯条。

OAD: 280" L x 72" W x 70" H Tray Erector/Packer
144" L x 55" W x 72" H Upstacker
72" L x 25" W x 41" H Transfer Conveyor
189 L x 60 W x80" H Bundler/Tunnel

Arpac Shrink Flow Thru TS33CF / MPD163090

• 制造商：Arpac
• Model Number:TS33CF / MPD163090
• Frain Number:5H5010

ARPAC，型号TS33CF，连续运动，水平流动通过收缩包装和隧道。*封装尺寸范围：4“至48”的长度;宽度为8“至26”;1/8“到12”高度。目前配备了240英寸的“长拖挡”，目前在30英寸中心设定为3½“高凸耳，25½”宽x 53“长的换热带，19½”宽x 32“长边密封输送机，25”宽x 30“长密封输送机，33“预折叠侧膜放松，完善的轮，废除，侧密封和28”宽热刀十字封，具有12“垂直行程。带触摸屏HMI的A / B控制器。ARPAC，型号MPD163090，两个区域收缩隧道，16“高X 30”宽孔径，90“长两个区域隧道，28”宽X 106“长输送和冷却风扇。
*Package maximums cannot occur together.
Rated from 0 to 80 linear feet per minute with number of product – depending on materials, application and machine configuration.
OAD: 466"L x 72"W x 80"H

Arpac Shrink Tunnels T54-40-120

• 制造商：Arpac
• Model Number:T54-40-120
• Frain Number:5H5020

ARPAC型号T54-40-120，高速，（2）区域收缩隧道，每分钟产品数量 - 取决于材料和应用。隧道具有40英寸高度的总宽度为40英寸;宽度为54“。室内尺寸为120英寸的长度。配备150“长x 45”宽尼龙玻璃纤维柔性纤维链接产品带式带式输送机，38英寸在饲料和排出高度。顶部安装的双鼓阀独立控制，以适应高速收缩包装系统。控制面板具有加热器1和2控制，电源打开，循环开始，停止，循环，重置e-stop按钮。安装在重型框架上，用（4）高度可调腿。

OAD: 150" L x 100" W x 94" H

Arpac流经TS37 / XT18萎缩

• 制造商：Arpac
• Model Number:TS37/XT18
• Frain Number:R30180

Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long lugged in feed conveyor, LDPE walking beam cross seal jaws and next generation side seal assembly. Features Allen Bradley PLC, interlocked guarding, pull out film carriage, no product detection, perf, scrap removal, jog and E-Stop.
电影规格：3“OD芯上最多39英寸的单次伤口薄膜;直径最长14英寸“。

Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable legs.

Speed dependent on materials, application, machine configuration and operator dexterity.

OAD: 251" L x 63" W x 61" H

Arpac Shrink Flow Thru HC37

• 制造商：Arpac
• Model Number:HC37.
• Frain Number:R30400

Arpac Model HC37, horizontal, continuous motion, servo driven, flow thru shrink wrapper and bottom lap sealer rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to per application in Length; up to 16" in Width; up to 7-1/2" horizontal jaws and up to 12" vertical jaws in Height. Equipped with 245" long Lugged servo driven in feed conveyor with 1/2" wide x 1" high lugs set on 16" centers with adjustable guide rails into the flow wrapper forming plow, with 19" long 9-1/2" wide vacuum conveyor pulling film and product to 32" long x 9-1/2" wide neophreme belt conveyor thru the 17" wide interchangeable horizontal or vertical cross seal jaws and overlapping bottom film static lap seal to the discharge. Centerfold film maximum width up to 37" and film roll maximum OD up to 14" and has 38" long servo driven film rolls with perf wheels. Control panel has A/B CPU and A/B panelview controller with seal bar and lap seal temperature controllers, manual / jog, cycle start and on / off with e-start, Mounted on (4) leg base frame with interlock safety door guarding.

OAD：84“L X 64”W X 78“H流动通过封口机
245" L x 36" W x 36" H In Feed Conveyor

Arpac流经TS37 / XT18萎缩

• 制造商：Arpac
• Model Number:TS37/XT18
• Frain Number:R30181

Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long product in feed conveyor, LDPE seal jaws and next generation side seal with product discharge conveyor. Control panel with A/B controller, has no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Film specs: Film specifications: up to 39" wide single wound film on 3" OD core; to 14" in diameter, with pull out film carriage. Mounted on (4) leg base frame with interlock safety guarding.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg base frame.

OAD：251“l x 63”w x 61“h

Arpac Shrink Bundler 105-24

• 制造商：Arpac
• Model Number:105-24
• Frain Number:5H4471

ARPAC，型号105-24内联，间歇运动，收缩捆绑和隧道。每分钟5到20个捆绑 - 取决于材料和应用。配有22英寸宽X 70英寸的进料输送机，24英寸宽胶卷，25英寸宽封闭钳口，带13“垂直行程，22英寸宽x 22”长内克拉内传输输送机到收缩隧道。单区域收缩隧道有24个“宽x 15”高总光圈x 60“长，带90”长x 24“宽的内部内部产品输送机。控制面板有触摸板控制和读数，开始/停止/ e-stop /手动密封按钮控制和数字温度控制对于密封杆和隧道。安装在重型基础框架上。

OAD：190“L X 63”W x 84“h

Arpac Shrink Bundler 105TW28

• 制造商：Arpac
• Model Number:105TW28
• Frain Number:R29143

Arpac, Model 105TW28, Inline, shrink bundler. Rated from 1 to 30 bundles per minute – depending on materials, application and machine configuration. Equipped with 20" wide x 70" long slip torque in feed conveyor, 28" wide hot knife seal jaws with 12" vertical travel and 25¼" wide x 12" long transfer conveyor to shrink tunnel. 70" long shrink tunnel has 29” wide x 17" high total aperture, 110" long x 29" wide product conveyor and cooling fan on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD：202“l x 72”w x 90“h

Arpac Shrink Bundler 10828TW

• 制造商：Arpac
• Model Number:10828TW
• Frain Number:R29142

Arpac, Model 108-28 TW, right angle shrink bundler. Rated from 10 to 30 bundles per minute – depending on materials, application and machine configuration. Equipped with 10" wide x 40" long in feed conveyor, film hoist, 90° product pusher, 29" wide hot knife seal jaws with 10" vertical travel and bundle hold down tamp. 83" long single zone shrink tunnel has 30” wide x 16" high total aperture, 128" long x 29" wide product conveyor and cooling fan on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 223"L x 68"W x 121"H

Arpac Shrink Bundler 55GI20CX

• 制造商：Arpac
• Model Number:55GI20CX
• Frain Number:R28041

Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 36" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 26" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 21” wide x 16" high total aperture, 90" long x 20½" wide product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 167"L x 60"W x 105"H

Arpac Shrink Bundler 11536

• 制造商：Arpac
• Model Number:11536
• Frain Number:R29141

Arpac, Model 115-36, Inline, shrink bundler. Equipped with 26¾" wide x 42" long in feed conveyor, 37" wide hot knife seal jaws with 12" vertical travel and 26¾" wide x 42" long transfer conveyor into shrink tunnel.
隧道:83“长隧道37”wide x 15" high total aperture, 125" long x 37" wide conveyor, cooling fan and roller side compression on discharge. AB controller, touch pad and digital temperature controls for seal bar and tunnel.
速度取决于材料，应用和机器配置。

OAD: 218"L x 65"W x 120"H

ARPAC收缩Bundler 25TW28

• 制造商：Arpac
• Model Number:25TW28.
• Frain Number:5H1670

Arpac, Model 25TW-28, Inline, compack single frame shrink bundler rated from 5 to 25 bundles per minute – depending on materials, application and machine configuration. Product size range: 7" to 20" in Length; 6" to 18" in Width; 4" to 10" in Height. Single-wound film roll: 27" in width; 14" Max OD; on 3" OD core. Equipped with 36", 20" long x 22" wide in feed belt conveyors, maximum 28" wide hot impluse seal jaws and 11" vertical travel with 18" long x 24" wide transfer conveyor to single zone shrink tunnel with 26” wide x 16" high total aperture and 60" long tunnel has 120" long x 29" wide flex link product conveyor with top mounted blower and discharge end cooling fan. Control panel has A/B PLC controller, with touch pad controls and readout, start / stop / e-stop / manual seal push button controls and statis light bar. Mounted on heavy duty base frame with slide door safety guarding.
速度取决于材料，应用和机器配置。
OAD: 180" L x 60" W x 84" H