自动水平塔克Machines

Tishma Innovations Cartoner Auto Horiz. Tuck (Auto) TI-600-135

• Manufacturer:Tishma Innovations
• 型号：ti - 600 - 135
• 数字：5H5410

ti - 600 Tishma模型,自动的,水平,伺服driven, continous motion, reverse tuck cartoner rated from 50 to 250 cartons per minute – depending on materials, application and machines configuration. Equipped with 90" long x 2-1/2" wide delron product in feed belt conveyor with automatic over head sweep arm product loader to 209" long fixed product bucket conveyor with 4-1/2" long x 1/2" wide x 9-/12" deep total dimmension buckets with 2" long x 1/2" wide x 9-1/2 deep product holder pockets set on 5" centers. (2) belt automatic blank carton magazine with (4) head rotary suction cup pick n place, carton top squaring hold down bar, automatic side barrel cam product loader, no product / no carton, no carton / no load, major / minor flap plows and closers, with 20" long compression discharge belt conveyor. Control panel has A/B CPU controller with panel view, start, reset, stop and e-stop push button controls, VFD and statis light bar. Mounted on heavy duty base frame with interlocking safety guarding, leveling legs and hand held controller.

OAD: 294" L x 88" W x 80" H with in feed conveyor

凸轮Cartoner Auto Horiz. Tuck (Auto) PRX

• Manufacturer:凸轮
• 型号：PRX
• 数字：5E0021

Automatic, intermittent motion, horizontal, walking beam, tuck cartoner capable of speeds from 30 to 60 cpm – speeds depending on materials and application. Cartons size range: 1/2" – 3 1/2" L x 1/2" – 2" W x 2" – 7 3/4" D, has adjustable bucket in feed, right angle product pusher into carton, dual walking beam drive on 4-3/4" centers, 27" L magazine, reciprocating vacuum pic-n-place, top carton squaring mechanism and e-stop. AB SLC 5/04 with Panel View, integrated vacuum pump, changeover gauges and barrier guarding with electrical interlock, and is mounted on stainless steel frame with casters and height adjustable legs.

OAD: 130" L x 59" W x 75" H

Product timing in feed, dry-ink coder, and literature placer available at additional cost.

Z Automation Company Inc /ZAC Cartoner Auto Horiz. Tuck (Auto) CH7.510I

• Manufacturer:Z Automation Company Inc / ZAC
• 型号：CH7.510I
• 数字：5G9314

Z Automation Company, Model CH 7.5-10-I, automatic, horizontal, intermittent motion, tuck cartoner. Rated from 5 to 20 cartons per minute – depending on materials, application and machine configuration. (1) chain unit currently set on 7½" centers with 2" wide x 5" high fixed lugs. Equipped with 4" wide x 88" long incline eagle belt product feeder, 16" high product down stacker, swinging product stack transfer arm, push arm auto loader and 16" long adjustable carton magazine with reciprocating suction cup pick and place. Control panel has A/B CPU with panel view and push button controls, status light bar and interlocking safety guarding. Mounted on stainless steel base frame.

OAD: 208" L x 78" W x 76" H

Z Automation Company Inc /ZAC Cartoner Auto Horiz. Tuck (Auto) CH7.510I

• Manufacturer:Z Automation Company Inc / ZAC
• 型号：CH7.510I
• 数字：5 g9315

Z Automation Company, Model CH 7.5-10-I, automatic, horizontal, intermittent motion, tuck cartoner. Rated from 5 to 20 cartons per minute – depending on materials, application and machine configuration. (1) chain unit currently set on 7½" centers with 2" wide x 5" high fixed lugs. Equipped with 4" wide x 88" long incline eagle belt product feeder, 16" high product down stacker, swinging product stack transfer arm, push arm auto loader and 24" long adjustable carton magazine with reciprocating suction cup pick and place. Control panel has A/B CPU with panel view and push button controls, statis light bar and interlocking safety guarding. Mounted on stainless steel base frame.

OAD：240“ L x 78” W x 80” h

Nordale / AFA Systems Inc Cartoner Auto Horiz. Tuck (Auto) MK APS

• Manufacturer:Nordale / AFA Systems Inc
• 型号：MK APS
• 数字：5G4098

Nordale Model Mk AP，自动，水平，间歇运动，伺服驱动，不锈钢，Tuck Cartoner，每分钟纸箱数量，具体取决于材料和应用。3链可调节目前可调节的6英寸宽x 2英寸高凸耳。带有84英寸长的滑动风格可调节产品桶输送机，60英寸长（2）皮带自动空白纸箱杂志，带2个头部旋转吸气杯挑选位置，无产品 /没有纸箱武器，主要和小襟翼犁和闭合器，带有36英寸长的压缩部分。控制面板具有带有面板视图和按钮控件的A/B CPU，Statis Light Bar和互锁的安全保护。安装在带脚轮的不锈钢底架上。

Coder Available At Addition Cost

OAD: 200" L x 69" W x 79" H

Bosch Cartoner Auto Horiz。Tuck（Auto）Cuk 3060

• Manufacturer:博世
• 型号：CUK 3060
• 数字：5G0711

博世Model CUK 3060, continuous motion, stainless steel, horizontal tuck, cartoner rated from 40 to 220 cartons per minute – depending on materials and application. Carton size range: 60mm to 120mm in Length; 15mm to 85mm in Width; 75 mm to 120mm in Depth. Equipped with a 72" long product infeed conveyor with guide rails, disk to star wheel product indexing system, container knock down, adjustable bucket conveyor, 28" long blank carton magazine, 3-head rotary vacuum pick and place, 3-chain carrier conveyor with 4" high lugs set on 6" centers, barrel cam loading section, and 28" long dual side belt compression discharge. Additionally features interlocking Lexan safety guarding, quick change Seco gauges, A/B PLC, and an A/B Panel View. Mounted on a stainless steel frame with height adjustable legs.

可选的Rontech预档的传单喂食器可提供额外费用。

OAD：288“ L x 72” W x 88” h

Bosch Cartoner Auto Horiz。塔克（自动）汽车T5

• Manufacturer:博世
• 型号：CAR T5
• 数字：5G0710

自动，不锈钢，间歇性运动，水平塔克，纸箱的额定值从每分钟30到100纸箱，具体取决于材料和应用。纸箱尺寸范围：长度20mm至95mm；宽度为16mm至70mm；深度为60mm至205mm。配备了84英寸长的产品注射输送机，带有可固定的导轨，24英寸长的空白纸箱杂志，2杯真空吸尘器供应和地点，4链可调式载体链，在5英寸中心设置3英寸高的凸轮，正确的角度产品到纸箱机械推动机，产品负载期间的襟翼开门，顶部纸箱挡栏和28英寸长的Dule侧压缩皮带放电。此外，还具有互锁的Lexan安全保护，快速更改SECO GUAGES，状态栏，Siemens PLC和秋千手臂触摸面板操作员界面。安装在具有可调节腿的不锈钢框架上。

可选的传单喂食器和墨水邮票编码器可额外提供。

OAD：138“ l x 68” W x 88” h

Marchesini Cartoner Auto Horiz。塔克（自动）BA300GL

• Manufacturer:Marchesini
• 型号：BA300GL
• 数字：5E9753

自动连续运动水平纸箱，能够从120到300 cpm的速度 - 速度取决于材料和应用。纸箱尺寸范围：长度为25mm至100mm；宽度为13mm至70mm；78mm至200mm的深度。配备了可调节的饲料中的可调节桶，将三个链条凸耳系统设置在5英寸中心，旋转纸箱馈线，桶装凸轮产品装载机和毛线闭合系统。
Mounted on casters.

OAD: 174" L x 74" W x 66" H

Options available at additional cost:
浮雕编码器和水泡馈线。

Tisma Cartoner Auto Horiz. Tuck (Auto) JV

• Manufacturer:Tisma
• 型号：合资
• 数字：5F8720

Tisma Model JV, automatic, continuous motion horizontal, glue cartoner rated from 50 to 200 cartons per minute – depending on materials and application. 3 chains adjustable set on 10" centers with 2" wide x 3" high lugs. Carton size range: 2" to 7" in Length; 1/2" to 3-3/4" in Width; 5" to 9" in Depth. Equipped with 200" long fixed bucket in feed conveyor has 10" long x 6-1/2" wide x 2-3/4" high product buckets, 36" long 2 chain powered blank carton magazine, 2 head rotary carton pic-n-place, rotary barrel cam loader with top paddle product confiner, no product / no carton, no carton / no product sensors. flap closers and 20" long dual belt compression section. Control panel has A/B controller and DL20 digital display, with start, stop, run, jog, auto, manual top hold down, barrel pusher controls with e-stop, safety gaurding. Mounted on base frame with casters.

OAD: 425" L x 90" W x 71" H

PMI Cartoner Auto Horiz。塔克（自动）HMI-3.750

• Manufacturer:PMI
• 型号：HMI-3.750
• 数字：5E8042

Automatic, continuous motion, horizontal tuck cartoner speeds depending on application. Carton size range: 1-1/2" – 3 1/4" in Length; 1" – 3-1/2" in Width; 2" – 3 1/4" in depth (change parts required). Equipped with a 260" long in feed with 4" long x 1" wide x 3-3/8" deep fixed buckets, 72" carton magazine, four head rotary pic-n-place, barrel cam loader, flap tuckers, belt product flap closing belts and carton discharge chute. A/B PLC with panel view and interlocking saftey guarding. One chain unit on 4" centers.

Rotary leaflet feeder, worm screw bottle loader, and emboss coder available at additional cost

OAD：300“ L x 60” W x 70” h

Marchesini Cartoner Auto Horiz。塔克（自动）BA50二手纸箱

• Manufacturer:Marchesini
• 型号：BA50
• 数字：5C8748

Automatic intermittent motion, walking beam, horizontal cartoner capable from 10 to 60 CPM – depending on materials and application. Equipped with 6" centers for a carton size range: (length) 1.6" – 5.75"; (width) 0.9" – 3"; (depth) 2" – 6.75". Blister transfer in feed system and adjustable buckets.
Last used for blister cards. Reverse tuck.

OAD:82"tall 137"wide 63"deep
.