Mill Machines

Lehmann Mill Roller (Mill) 3

• Manufacturer:Lehmann
• Model Number:3
• Frain Number:5E2010

3 roller mill with 5" diameter x 11" L rolls. Equipped with hand crank adjustment for gaps, 17"L x 12"W x 1-1/2"H product tray, 5"W discharge tray at 30"H and on/off controls. Mounted on casters.

OAD: 38"L x 46"W x 40"H

Fluid Air Mill Hammer 003

• Manufacturer:Fluid Air
• Model Number:3
• Frain Number:5C0057

Stainless steel Fluid Air comminuting / hammer mill rated up to 6,000 RPM. Equipped with feed auger, reversing blade feature, dual frequency drives.
Capable of handling both wet or dry products. Able to reduce to 40 microns. Results dependant on materials, application and machine configuration. Screens required per application. Mounted on casters.

OAD: 45"l x 25"w x 6’9"h

Drais Mill Ball & Pebble PML V+H

• Manufacturer:Drais
• Model Number:PML V+H
• Frain Number:5B9904

Automatic, continuous operation, ultrafine wet grinding laboratory model. Has 1.2 liter 316 S/S product chamber, perforated 316 S/S disc agitator, jacketed chamber, 90-degree operating range, grinding media from 250 nano-meters to 2mm, 20 psi max grinding chamber, 45 psi max cooling system, S/S collecting pan for media, frictional gap size of 0.1 mm, E-stop, and variable frequency drive controller. Mounted on epoxy coated frame with casters.

OAD: 42"L x 29"W x 68"H

Lehmann Mill Roller (Mill) 4A

• Manufacturer:Lehmann
• Model Number:4A
• Frain Number:5B9771

Lehmann 3 roll mill has 10" diameter x 22" wide stainless steel rollers. Hot oil heated. Apron roll speed: 310 rpm. Side shields are eccentric lever lift design with cross bar. OAD: 5’l x 4’w x 3’9"h

Buhler-Maig Mill Roller (Mill) SDW800

• Manufacturer:Buhler-Maig
• Model Number:SDW800
• Frain Number:5E3791

Heavy duty 3-roller dispersion mill rated at 400 lbs per hour depending upon application equipped with 32"L x 10-1/2" diameter hardened steel rollers and a 32" working area. Also features water controllers to regulate temperature, product apron, variable speed controls and E-stop

OAD: 50"L x 78"W x 84"H

Buhler-Maig Mill Roller (Mill) SDW800

• Manufacturer:Buhler-Maig
• Model Number:SDW800
• Frain Number:5E3790

Heavy duty 3-roller dispersion mill rated at 400 lbs per hour depending upon application equipped with 32"L x 10-1/2" diameter hardened steel rollers and a 32" working area. Also features water controllers to regulate temperature, product apron, variable speed controls and E-stop

OAD: 56"L x 78"W x 80"H

J H Day Mill Roller (Mill) 10 X 22

• Manufacturer:J H Day
• Model Number:10 X 22
• Frain Number:5F2040

Three roll dispersion mill rated up to 350 lbs per hour – depending on materials and application. Roller size: 10" in diameter; 22" in length. Roll speed: apron roll 300 rpm; middle roll 150 rpm; feed roll 59 rpm. Equipped with apron, stainless steel end plate, hydraulic roll sets, doctor blade, and stainless steel mesh guarding.

OAD: 56" L x 45" W x 52" H

Fitzmill Mill Hammer JT

• Manufacturer:Fitzmill
• Model Number:JT
• Frain Number:R30360

Fitzpatrick, Model JT, 316 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with 12" ID x 3" deep 304 stainless steel feed pan with 2.75" ID product port, (12) swinging knife / impact blades with screen area of 2" wide x 16" long and 8" long x 2" wide bottom product discharge with 35” ground clearance. Push button start /stop controls and mounted on a base with locking casters.

OAD: 35"L x 32"W x 55"H

Fitzmill Mill Hammer DAS06

• Manufacturer:Fitzmill
• Model Number:DAS06
• Frain Number:R30380

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades and 15" x 5" discharge with 32" of ground clearance. Mounted on (4) leg stainless steel frame with casters.

OAD: 48"L x 30"W x 61"H

Fitzmill Mill Hammer DKAS012

• Manufacturer:Fitzmill
• Model Number:DKAS012
• Frain Number:R30383

Fitzmill, Model DKAS012, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 24" long x 4" deep feed pan, (32) 3" long x 1½" wide fixed knife blades and 12" x 15" discharge with 45" of ground clearance. Mounted on (4) leg stainless steel frame with casters

OAD: 50"L x 50"W x 78"H

Fitzmill Mill Hammer DAS06

• Manufacturer:Fitzmill
• Model Number:DAS06
• Frain Number:R29590

Fitzmill, Model DASO6, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with a 28" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat, 11” long x 6” wide blade chamber and (16) fixed knife/impact blades powered by a 7½ Hp motor drive. Product discharge is 15½” long x 5¾” wide with 34” floor clearance. Start / stop controls, mounted on (4) legs with casters.

OAD: 48"L x 35"W x 64"H

Micron Powder Systems Mill Hammer 2DH

• Manufacturer:Micron Powder Systems
• Model Number:2DH
• Frain Number:R30120

Micron Model Mikro 2DH, hammer mill. Equipped with stainless steel contact parts, 16" x 16" x 13" deep hopper, 12" long x 3" twin feed screws, (24) rotary split swing hammers driven by 15 Hp motor and 24" OD cover with 5" OD air relief port. Mounted on casters. Rate of production dependant on materials, application and machine coniguration.
OAD: 48" L x 48" W x 63" H